Gwifren Nicel Pur 200/Uns Rhif 2200 0.25mm
Gradd: Ni200, Ni201, N4, N6
Hydwythedd uchel
Gwrthiant cyrydiad rhagorol
cryfder mecanyddol da
Disgrifiad aloi
Nicel 200/201 yw'r radd a ddefnyddir fwyaf eang, a bennir yn gyffredinol ar gyfer capiau transistor, anodau ar gyfer tiwbiau electronig, gwifrau cydrannau electronig / Arwain-mewn-Wires ar gyfer lampau ac ar gyfer Wire-Mesh. Fe'i defnyddir hefyd ar ffurf stribedi ar gyfer amrywiol gymwysiadau gan gynnwys batris Ni-Cd.
Cyflwr Cyflenwi
Mae Nickel 200, 201 a 205 yn cael eu cyflenwi o dan yr amodau canlynol:
Oer Drawn, Tymher Neillduol.
Cold Drawn, Annealed. Wedi'i Sythu a'i Dorri Hydoedd.
Nodyn:
NUS N02201 (ASTM B 162) yr un fath â N4 (GB/T 2054).
NUS N02200 (ASTM B 162) yr un fath â N6 (GB/T 2054).
Ffurflenni
Coil - Strip, Ffoil, Rhuban
Gwifren - Proffil, Rownd, Fflat, Sgwâr
gwialen, bar, gofaniadau, plât, dalen
Cyfansoddiad cemegol
Gradd | Ni+Co | Cu | Si | Mn | C | Mg | S | P | Fe |
N4 | 99.9 | 0.015 | 0.03 | 0.002 | 0.01 | 0.01 | 0.001 | 0.001 | 0.04 |
N6 | 99.6 | 0.10 | 0.10 | 0.05 | 0.10 | 0.10 | 0.005 | 0.002 | 0.10 |
Ni201 | 99.0 | ≤0.25 | ≤0.35 | ≤0.35 | ≤0.02 | / | ≤0.01 | / | ≤0.40 |
Ni200 | 99.0 | 0.20 | 0.30 | 0.30 | 0.15 | / | 0.01 | / | 0.40 |
Galluoedd Ffoil Nicel
Gradd | Llain Nicel Pur 99.6% / 99.9% |
Trwch | 0.002 i 2.50 mm |
Goddefiadau | +/- 5% (goddefiannau arbennig ar gael) |
Lled | Hyd at 350mm o led |
Maint coil | Hyd at 80 kg heb welds |
Ystodau Tymher | Annealed to Full Hard |
Ffoil nicel Cynnyrch Precision
Trwch | Trwch lwfans | Burr uchder | Lled cwmpas a goddefgarwch | |||||
2≤w<10 | 10≤w<50 | 50≤w<100 | 100≤w<150 | 150≤w<200 | 200≤w | |||
0.02≤t<0.05 | ±0.003 | ≤0.005 | ± 0.05 | ±0.10 | ±0.15 | ±0.20 | ±0.30 | ±0.50 |
0.05≤t<0.1 | ±0.005 | ≤0.01 | ||||||
0.1≤t<0.2 | ±0.008 | ≤0.015 | ||||||
0.2≤t<0.3 | ±0.012 | ≤0.02 | ||||||
0.3≤t<0.4 | ±0.015 | ≤0.03 | ± 0.10 | ±015 | ±0.25 | ±0.50 | ±0.80 | ±1.00 |
0.4≤t<0.6 | ±0.025 | ≤0.05 | ||||||
0.6≤t<0.8 | ±0.030 | ≤0.06 | ± 0.30 | ±0.40 | ±0.50 | ±0.50 | ±0.80 | ±1.00 |
0.8≤t<1.0 | ±0.040 | |||||||
1.0≤t<1.2 | ±0.050 | ≤0.08 | ± 0.50 | ±0.50 | ±0.80 | ±1.00 | ±1.00 | ±1.50 |
1.2≤t<1.4 | ±0.060 | |||||||
1.4≤t<1.7 | ±0.070 | ≤0.10 | ||||||
1.7≤t<2.0 | ±0.080 |